Skip to main content 跳到主目录
Fluke Networks
  1. Home
  2. Support
  3. Knowledge Base
  4. i appears at the end of the Autotest - DTX CableAnalyzer

i appears at the end of the Autotest - DTX CableAnalyzer

DTX CableAnalyzer™ 2014-02-24

Users may see i icon at the end of an Autotest. An example is shown below.

TIA Category 5e Channel Test

The above screen shot is from a TIA Category 5e Channel Test.

DC Loop Resistance, ACR-N and PS ACR-N are not formal requirements for this standard. However, many consultants/customers expect to see these parameters on the test report. For this reason, the DTX CableAnalyzer reports the values but does not include them when evaluating the Autotest result.

i icon is for "Information Only".

Back to Knowledge Base