Skip to main content 跳到主目录
  1. Home
  2. Support
  3. Knowledge Base
  4. Statement of Volatility - MicroScanner2

Statement of Volatility - MicroScanner2

MicroScanner2 2016-02-29
Fluke Networks Logo Date: March 1, 2016
Statement of Memory Volatility
Product and Manufacturer
Models: MicroScanner2 Cable VerifierManufacturer: Fluke Networks
Address: 6920 Seaway Blvd.
City: EverettState: WAZip: 98203Phone: 800-283-5853
Volatile Memory
Does the item contain volatile memory (i.e., memory whose contents are lost when power is removed)? ☑ Yes ☐ No (If the answer is 'Yes’, provide the following information for each type of memory.)
Memory Type (SRAM, DRAM, etc.):Size:User Modifiable:Function:Process to Clear:
SRAM2 KBytes☐ Yes ☑ NoCPU RAM for stackTurn unit off.
Non-Volatile Memory
Does the item contain non-volatile memory (i.e., memory whose contents are retained when power is removed)? ☑ Yes ☐ No (If the answer is 'Yes’, provide the following information for each type of memory.)
Memory Type (BBRAM, Flash, EEPROM, etc.):Size:User Modifiable:Function:Process to Clear:
Internal CPU FLASH60 KBytes☐ Yes ☑ NoMain program memory and user set Nominal Velocity of PropagationNone.
Media
Does the item contain media storage capability (i.e., removable or non-removable disk drives, memory cards, etc.)? ☐ Yes ☑ No (If the answer is 'Yes’, provide the following information for each type of memory.)
Sub-Item:Storage Type (Disk, Tape, etc.):Size:User Modifiable:Function:Process to Clear:
☐ Yes ☑ No
Additional Information
This is a simple cable tester. FLASH memory is used for program storage and is modified in one instance to store a simple 16 bit number which is used as a calibration factor (called the Nominal Velocity of Propagation). This factor is used to correct the length measurement of a cable. RAM memory is used as operating memory and stack while the unit is running.
Fluke Networks Representative Information
Name: Jeff ClarkTitle: Sr. Engineering ManagerOffice Phone: 425-446-5265Fax/Email: jeff.clark@flukenetworks.com